Home » Best Drop Hitch For Lifted Trucks In 2021 – Top 6 Ranked Reviews

When you buy through links on our site, we may earn an affiliate commission at no cost to you.

Best Drop Hitch For Lifted Trucks In 2021 – Top 6 Ranked Reviews

Most of the time, a trailer truck is enough to haul stuff from one place to another. But the increasing demand for quicker services and feasible options demands more work than a normal trailer truck can do. This has led transportation and moving companies to use more than one trailer with their trucks.

But using more than one trailer to help you with the moving is not as easy and simple as it may initially seem. For maximum functionality and safety, you will need other accessories to make this hauling job possible.

Such an accessory is a hitch. You may have seen them at the back of an SUV or a truck, but a drop hitch is also used to attach trailers. If you are in the wanton of the best drop hitch for lifted trucks, you are in the right place. All you have to do is keep on reading to learn more.

Best Drop Hitch For Lifted Trucks In 2021 – Top 6 Ranked Reviews

Best Drop Hitch For Lifted Trucks Comparison Table

ProductsMax CapacityWeather-ResistantRating
Max Capacity
14,000 lbs
Weather-Resistant
Yes
4.8 out of 5 stars (4.8 / 5)
Max Capacity
12,000 lbs
Weather-Resistant
No
4.8 out of 5 stars (4.8 / 5)
Max Capacity
16,000 lbs
Weather-Resistant
No
4.5 out of 5 stars (4.5 / 5)
Max Capacity
12,000 lbs
Weather-Resistant
No
5 out of 5 stars (5 / 5)
Max Capacity
10,000 lbs
Weather-Resistant
No
4.9 out of 5 stars (4.9 / 5)
Max Capacity
10,000 lbs
Weather-Resistant
No
4.7 out of 5 stars (4.7 / 5)

Top 6 Best Drop Hitch For Lifted Trucks In 2021 Reviews

1 Curt Ball Mounts C45900

Curt ball mount is an adjustable mount, which is rather large in size if you consider the double hitch ball with the shank. The mount weighs approximately 32 pounds and has a solid metal build. Curt Ball Mount C45900 has a built-in anti-rattle device in it.

When it comes to the coating, the Curt Ball mount has a powder coat finish, done so to increase its durability. You can use this mount with a two-inch trailer hitch receiver with complete ease. It has an impressive overall capacity of about 14,000 pounds and a rounded tongue weight capacity of about 1,400 pounds.

When you observe the capacity of the two-inch ball, you will see that it is approximately 10,000 pounds, with a 14,000 pounds’ capacity for the ball, which is the size of 2-5/16 inches. This clearly indicates that the mouth has high-strength steel in its construction.

Apart from that, the high versatility of this product makes it immediately stand out. You can easily adapt your trailer hitch to any kind of towing situation you face with the help of this highly versatile and easy-to-adjust design.

In addition to that, you don’t even have to worry about the weather and rust ruining the mount. The ball mount is weather-resistant through the shielding of black powder coat finish that protects it from rain, dirt, road grime, and salt. The dual ball attachment features a corrosion-resistant zinc plating, which means you have nothing to worry about in this regard.

With the Curt ball mount, you can get the maximum rise of 5¼ inches. And to ensure smoother towing, this adjustable drop hitch comes with a built-in anti-rattle feature. This works to deter all vibrations, chucking, and rattling at the coupling point just so you can experience a smoother and quieter ride.

Curt Ball Mounts C45900
Our rating:4.8 out of 5 stars (4.8 / 5)

Pros

  • Built-in anti-rattling device installed.
  • Weather-resistant powder coating.
  • Supports heavy-duty towing.

Cons

  • Hard to replace balls.
  • Hard to store.

2 MaxxHaul 70380

The MaxxHaul 70380 adjustable ball mount can tow 8,000 to 12,000 pounds of weight with complete convenience and safety. As far as the drop and rise are concerned, you can get up to 6¼ inches drop or 7-7/8 inches of rise.

In order to get the needed drop or rise, all you need to do is turn the ball mount over to select the relevant option. After you are done installing the MaxxHaul ball mount on your truck, you need to pull the included pins to adjust the ball platform upwards or downwards.

You will also need to pull out the pins to flip the ball platform between the two inches or 2-5/16 inches hitch ball as you need. Once you replace your pins, you are ready to roll. MaxxHaul ball mount can fit up to 2 inches’ square trailer hitches and is a great solution for truckers who need to tow several trailers.

If you keep your trailer leveled with the tow vehicle, the towing process will become easier and significantly safer. If the trailer you have is more than two inches nose up, then there are chances that it will sway when you tow it. This swaying will not only make the ride less comfortable and dangerous, but it will also increase the tire wear. If the trailer sways too much, it will make it harder for you to drive the truck.

If the trailer you possess is more than two inches nose down, then there is a chance of putting too much weight. The weight will inevitably affect the hitch and tow vehicle as it would exceed the weight limit for both of them.

And if the weight is increased, it will put stress on the connection between the trailer and hitch. Thus, it could result in unequal weight distribution between the front and back wheels. This can affect your steering and brake properties.

But if you have an adjustable ball mount system like that of MaxxHaul, it will be easier to keep the tow on the level.

MaxxHaul 70380
Our rating:4.8 out of 5 stars (4.8 / 5)

Pros

  • Relatively affordable hitch ball mount.
  • Easy to raise, lower, and flip the ball.
  • Wide range of elevation adjustment.

Cons

  • Extra slope between the ball and hitch mount.
  • You might hear rattling sounds.

3 Drop Hitch by Gen-Y 525

Drop hitch by Gen-y 525 is made with heavy-duty steel, which has been sandblasted and coated with a durable silver vein powder coat. Therefore, it gives it a heavy-duty capacity to safely tow up to 16,000 pounds. It is one of the most heavy-duty drop hitch in the market and commercial truckers mostly use it. So if you are looking for the best drip hitch for lifted trucks, then this one should be on your list.

With this drop hitch mount, you can raise or drop your hitch up to 10 inches. The dual receivers on this mount result in multiple application options that you can utilize. Some of these options include a standard ball mount, luggage rack, motorcycle carriers, cargo rack, and many more options that can be utilized commercially and for personal usage.

All of the Gen-Y products are made in the United States of America. This means that they are carefully tested and put to usage so that it can pass all the safety tests before it is put out for sale in the market. This also ensures that safety in terms of driving is also handled. In other words, the trailer and cargo don’t sway, and the pressure remains distributed due to suited leveling.

Gen-Y drop mount offers a stress-free one-pin adjustment that is easy to make whenever you need. There’s also an anti-war pinhole, which will ensure strength and safety accordingly. This kind of drop mount is compatible with all 2-inch attachments with the help of a stabilizing kit.

Drop Hitch by Gen-Y 525
Our rating:4.5 out of 5 stars (4.5 / 5)

Pros

  • Heavy-duty weight carrying.
  • Easily adjustable.

Cons

  • The heavy build may not be suitable for every truck.

4 Draw-Tite 4283

Draw Tite ball mounts come with a 7-inch riser and an 8-inch drop and can bear the heavy-duty weight of 12,000 pounds. This ball mount was designed specifically to fit snuggly with a 2-inch x 2-inch receiver-style hitch. The shank is made up of solid metal, and it is wielded downwards as well as to the support in the back. Therefore, this is a very heavy ball mount.

Due to its raw steel finish, the piece holds well against rust and corrosion caused by rain, dirt, and grime. Due to its heavy welding, you won’t have to worry about the durability of the shank, and it can last you a long time.

When you decide to get a hitch ball for your Draw Tite, you might want to make sure that the shank does not exceed the ball hold diameter. For the ball mount that’s going to fit here, the measurement will be 1¼ inch.

When you install it in the drop position, it will give you an 8-inches drop when you measure from the inside top edge of the receiver tube to the ball platform at the bottom. When you install the Draw Tite in a rising position, the measurements will change to give you a rise of 7 inches.

Draw-Tite 4283
Our rating:5 out of 5 stars (5 / 5)

Pros

  • It provides additional height mount up for the perfect trailer level.
  • Heavy in weight.
  • Tows up to 12,000 pounds.
  • High tolerance

Cons

  • Quite heavy

5 B&W Trailer Hitches Tow & Stow Double Ball Hitch

All of the B&W trailer hitches are known for their quality and gross towing weight. The Tow & Stow double ball hitch has a gross towing weight of up to 10,000 pounds. This practical ball hitch has a reputation for being outstanding.

This product definitely looks good and lasts as well. The structure consists of a zinc phosphate base that offsets the shiny steel-plated finish with a black powder finish on the body of the product. With its excellent anti-corrosive properties, Tow & Stow double ball hitch is definitely made to last a long time.

The thing that makes it unique from other hitches is the tri-ball installation. If you have the need to tow a range of different types of trailers or cargo or any other type of attachment, then all the differently sized hitch receivers can be of great use to you.

With Tow & Stow’s hitch, you get two standard ball hitch sizes that can be easily mounted on a simple device with just a click, lock, and turn of the right ball into its position. This makes it a highly effective and versatile design.

This kind of ball mount can fit a standard 2.5-inch receiver. There are two balls of 2 inches’ x 2 5/16 inches, that can provide you with versatility in towing. You get a 7.5-inch rise with a 7-inch drop if you use the Tow & Stow dual ball hitch.

The reason why most buyers like this product is because it is very easy to adjust and stow. And once you are done, you can just rotate the balls backward to spare any extra hassle to the user. This also helps in keeping the shine and powder coating of the balls intact.

B&W Trailer Hitches Tow & Stow Double Ball Hitch
Our rating:4.9 out of 5 stars (4.9 / 5)

Pros

  • Versatility in usage.
  • The balls roll back when not in use, making the storage easier.

Cons

  • Expensive.

6 Weigh Safe WS10

Weigh Safe WS10 can tow up to a minimum of 8,000 pounds and a maximum of 14,500 pounds. The reason why it is so popular to use is that Weigh Safe has a built-in scale that can help you measure your trailer’s tongue weight every time you tow it. This helps in making sure that the tongue weight isn’t too high or too low, adding to the safety and reliability of this product.

Weigh Safe WS10 mount platform is made with 6061 T6 billet aluminum, which is the same material that is used to build aircraft components, car frames, and freight liners too. This means that this material ensures superior strength while being lightweight at the same time.

The aluminum used also keeps it safe from rust and corrosion. The hitch balls used are made entirely of stainless steel just to ensure that no rust or corrosion ruins its functionality.

The 2-inch ball supports a weight capacity of about 8,000 pounds, while the 2 5/16 inches’ ball supports up to 14,500 pounds of weight. The tongue weight capacity stands at 2,200 pounds. This kind of hitch can fit 2½ inches x 2½ inches trailer hitch receivers.

Weigh Safe WS10
Our rating:4.9 out of 5 stars (4.9 / 5)

Pros

  • The scale allows spot adjustment for tongue weight.
  • Not very loose, neither too tight.
  • Heavy-duty.

Cons

  • No rubber covers for the key on the hitch.
  • The gauge breaks easily and spills hydraulic oil.

Best Drop Hitch for Lifted Trucks Buying Guide

If you are still unclear, a hitch is a type of towing accessory that you attach to a truck. You need it to get the matched height of your trailer and the towing accessory. So, a drop hitch basically allows you to connect a cargo or trailer without the fear of unbalancing it and losing control of your vehicle.

As mentioned above, your truck and the trailer you want to tow needs to be at the same height. Otherwise, towing can be prone to accidents which are not desirable. Therefore, it is important for you to know what kind of a hitch is reliable. Let us walk you through that with this guide.

Flippable Drop Hitches

You need to understand what a drop and rise are. When your trailer is lower than the truck’s height, it needs to be raised, so you give it a drop. Similarly, you need to give a rise when the trailer is higher than the truck’s height, and it needs to be lowered.

drop hitch for lifted trucks

It is very important that you have both of these functions readily accessible whenever you need them. You can get this function in the kind of drop hitches that you can flip and use. All of the drop hitches have a significant drop level, as the name suggests, but not all of them have a proper rising level. So when you choose, make sure that the rise is as strong as the drop.

Height Adjustability

If you are in the kind of work that requires you to tow different kinds of trailers, then you need a drop hitch, which has the function of height adjustability. This height is mainly referred to as the height at which the cargo and trailer can be coupled to the truck for towing purposes.

So you might want to choose a drop hitch that provides numerous height levels.

Shank Size

Shanks come in numerous sizes. But you need to buy a shank of the size that matches the receiver tube of your truck. Generally, there are four options to choose from. You can choose 1-1/4, 2, 2½, and 3-inch shanks. In case you get a shank that doesn’t match the receiver tube, or because the receiver tube is not up to standard sizing, you will need an adapter to connect the hitch of your trailer to the truck.

Weight capacity

When you finally set out to buy the best drop hitch for lifted trucks, make sure you consider the gross trailer weight and the tongue weight too. The GTW is the combined weight of the trailer, while TW is the weight that is put on the coupling point.

Conclusion

Towing can be for personal uses and for business purposes. It is a risky business that needs utmost safety and care because you will be dealing with not one but two heavy vehicles. While models like Weigh Safe WS10 and Curt Ball Mounts seem promising, we have found Draw Tite to be the most reliable one.

With a competitive gross towing weight and a strong build, Draw Tite has shown to be a reliable model of classic strength and quality as compared to other futuristic designs.

But then again, there are different preferences that match the truckers’ needs. This complete guide will surely help you choose the best drop hitch for lifted trucks that matches your needs.

Leave a Comment