Jumper cables are one of those essential tools that you should always have with you when driving. You never know when your car is going to run into some trouble, so it is better to be prepared than to be sorry.
The best jumper cables will supply power to a dead battery. For safety purposes, you cannot use just any set of wires. Thick cables with clippers at both ends are used to connect the discharged battery to an external power source.
You will learn all about jumper cables and their important features in this article. Before we get into that, here is a list of the best jumper cables:
- Best Jumper Cables Comparison Table
- Top 10 Best Jumper Cables For The Money In 2021 Reviews
- 1 Energizer Jumper Cables ENB 125
- 2 TOPDC Jumper Cables TD-P0020
- 3 Amazonbasics Jumper Cable BC120749A
- 4 AUTOGEN Jumper Cables Pro BCWD-2G20F
- 5 Stalwart 75-CAR1009 Jumper Cable
- 6 TWING Jumper Cables
- 7 NoOne Heavy-Duty Jumper Cables KJBC001
- 8 Emgo 84-96306 06’ Cycle Jumper Cable
- 9 Toulpuer Battery Jumper Booster TP009-1
- 10 Nilight 2 Pcs 30A Alligator Clips Booster Jumper Cable
- Best Jumper Cables Buying Guide
Best Jumper Cables Comparison Table
Energizer Jumper Cables ENB 125
|(5 / 5)|
TOPDC Jumper Cables TD-P0020
|(4.8 / 5)|
|(4.7 / 5)|
|(4.8 / 5)|
Stalwart 75-CAR1009 Jumper Cable
|(4.5 / 5)|
TWING Jumper Cables
|(4.7 / 5)|
|(4.8 / 5)|
|(4.8 / 5)|
|(4.9 / 5)|
|(4.5 / 5)|
Top 10 Best Jumper Cables For The Money In 2021 Reviews
1 Energizer Jumper Cables ENB 125
Energizer is one of the world’s largest battery manufacturers. They have six gauge and length options, but this model is their best one. It is a thick heavy-duty cable with one gauge and 25 feet of length.
Being extremely long gives the user more options to connect to the vehicle. For instance, you can connect both vehicles with one behind the other and not worry about the distance.
It has been measured for the current capacity of 800 amperes, and its low gauge means it is very thick. Given this, its flow of current is very stable and is compatible with heavy vehicles like SUVs, full-sized cars, and trucks.
The clamps have a thick vinyl coating for insulation and protection from rust and corrosion, etc. The clamps connect directly to the battery, therefore they need this protection. They have a strong spring that makes its grip very tight and secure. Thus, it ensures safety.
The cables themselves are Copper Clad Aluminum. This type of wire is lighter and less expensive than pure copper, and its conductivity is higher than just aluminum. It is also much cheaper and more reliable.
It is also resistant to temperature, usage in all weather conditions, and remains flexible even at -40°C. The cables are made to be tangle-free for easy use and no hassles. A travel bag comes with the jumper cables to make storage easy.
If there are any problems with the cable or you get a faulty product, then there is a two-year warranty that comes with a hassle-free replacement if needed. However, this will not be likely since one gauge jumper cables are popular and stable.
- The longest jumper cables
- High enough amps for jump-starting cars
- Thick vinyl coating for corrosion protection
- Cables are durable and flexible
- Has a low warranty period
2 TOPDC Jumper Cables TD-P0020
The most heavy-duty jumper cables have zero gauges. They have the most variety when it comes to the batteries and the cars they can jump start. This is because they are thick, and thick cables allow the most current through them, making their use very stable. The current rating of this model is 900 ampere.
Along with being thick, they are 20 feet long and can be used for front to back hook up, front to front hook up, and side to side hook up. Long cables also make it easy to connect to long vehicles like trucks.
The quality standard of these copper clad aluminum wires meets the standards of the Society of Automotive Engineers, which is an international standards organization. A thick PVC jacket coats the wires. This material is flame-retardant and water-resistant for safety.
This covering makes the cables usable and flexible even at -40°C. Its clamps are protected against rust and corrosion along with a strong spring that makes the grip tight. For good conductivity and energy transfer, the clamps are made of pure copper.
Both the side and top posts are compatible with the jaws. The product comes with a guide that shows how to connect the cables easily and securely. The vehicles it works with are cars, motorcycles, trucks, vans, and SUVs. It also has a five-year warranty period for replacements. Jumper cables with travel bags make carrying and transporting the product easier.
- Extra-long jumper cables for ease of use
- The cables are heavy-duty and high amp
- Its insulation can withstand extremely low temperatures
- Construction follows the international standards set by SAE
- It does not have the quick connect function
3 Amazonbasics Jumper Cable BC120749A
These cables are designed for jump-starting cars but not SUVs or trucks, etc. They have a 110 amperes rating and are certified by the Underwater Laboratories for meeting safety and standards.
It is 10-gauge and 12-feet long, therefore, suitable for small cars with dead or weak batteries. It uses the most common and safe conductive wire material, i.e., Copper Clad Aluminum.
They use tight grip alligator clamps with a comfortable handle to make the connection with the battery secure and easy.
The cables are red and black color-coded with insulation. For storage, there is a travel bag with the product. The color-coding makes it quick to recognize the positive and negative connections, so you don’t accidentally short-circuit the wires.
Since these are smaller in length, they are suitable to use when the cars are side by side. Along with that, the current rating means its use is limited to compact cars. This extremely low-priced jumper cable is the better option if you don’t drive an SUV or a heavy vehicle.
You can store the small and light cable more easily. There is also a small plastic storage bag with it. AmazonBasics also makes 16 and 20-feet jumper cables with six and four gauge thickness, respectively. There is also a one-year warranty period that goes with it.
- Has UL certification for safety
- Strong and tight-grip alligator clamps
- A travel bag included for carrying
- Cables are flexible and insulated
- The amps are too low for some car batteries
4 AUTOGEN Jumper Cables Pro BCWD-2G20F
Autogen makes portable air compressors, jump starters, power stations, and jumper cables. This jumper cable pro has the specifications of two gauge and 20 feet. What makes it suitable for vans, SUVs, full-sized cars, and trucks is the 800-ampere rating.
The length of the cable allows it to be connected to all kinds of cars and in all combinations, i.e., front to front, front to back, and side to side. The total width combined with the PVC covering of the cables is 12mm. This width can be used with large trailers and freight hauling trucks.
Its PVC (polyvinyl chloride) covering makes it tangle-free and flexible in extreme temperatures as well. Autogen tests its products to ensure 50,000 hours of working without damage.
The conductive wires are made of CCA, and they can be used with both top and side post batteries. The clamp jaws are also insulated for protection with vinyl. This covering protects the clamps from rust and corrosion.
The inside of the jaws is coated with copper for conductivity. The thick spring gives the clamps a tighter grip on the battery. It also has a compact travel bag and a one-year replacement warranty. They even give a 30-day money-back guarantee if the product fails. The wire’s conductivity is above the Underwater Laboratories requirements.
- Rust and corrosion protected clamps
- Charges the battery faster than other cables
- The clamps have a tight grip with a thick spring
- Large cable for easy use
- None that we could find
5 Stalwart 75-CAR1009 Jumper Cable
This Stalwart jumper cable is made for compact cars and small recreational vehicles. It is not extra long, but for its purposes, the 12-foot length is enough. This is an eight-gauge cable, meaning it has a thickness of 3.26 mm.
It comes with a round clear plastic bag to store the cables without tangling. The clamps have an insulated covering and are also color-coded for safety. It is compatible with top and side post batteries. The jumper cables are tested for safety and are highly durable.
- Has a tangle-free design
- Comes with a good storage bag
- Insulated grips for safety
- Has a very low price
- The cable’s length is not very long
6 TWING Jumper Cables
These jumper cables might not be the longest, but they have the highest current rating of 1000 amperes. They are heavy-duty cables with a thick inner core that can be used to jump-start large trucks and SUVs.
This two gauge cable is 350 times more powerful than thin 10-gauge cables. It is also available in a 25-feet length with the same current level and durability. The thick cables are made of highly conductive Copper Clad Aluminum.
The clamps have a tight grip on both the top and side post battery of vehicles. The PVC covering projects the wires from extreme temperature and keeps them working in all conditions.
For safety, the clamps also have insulation and protection from rust on the outer side with the inner jaw being conductive. To prevent short-circuiting and damage, there is an LED light that starts when the connection is right and an alarm that goes off in case of the wrong connection.
The cables are suitable for almost all vehicles due to their high current ratings. Given that, the travel bag, and their durability, they come at a very reasonable price. If you don’t need the high current and only want to charge up a motorcycle or small cars, you can reduce the price even further and buy the four-gauge version. All the other features and construction quality remain the same.
- They are highly conductive CCA wires
- Heavy-duty 1000 amp cables
- They remain flexible in extreme cold weather
- The cables are compatible with trucks and SUVs
- Its length is only 16 feet long
7 NoOne Heavy-Duty Jumper Cables KJBC001
This is a heavy-duty and fast connection cable with zero gauges or 14.7 mm width. It is 25 feet long and has a rating of 1000 amperes. This makes it suitable for cars, sedans, SUVs, full-size vans, trucks, and farm equipment.
For connection, there are four alligator clamps of copper to facilitate fast charging. The clamps have jagged teeth and a tight spring that makes for a strong and stable connection. For safety, the clamps also have a rubber covering.
The long length of the cables allows different connection points, i.e., side, front, and back. The PVC covering of the wires protects them from extreme cold and makes them more durable. It also makes them flexible, tangle-free, and easy to store.
The product also has a three-year warranty period. The cables use a smart-6 protector with green and red LED lights. The light goes green when the connection is right and red when the connection is wrong.
It also gives off an alarm when the connection is not right which saves the cables from short-circuiting. The jumper cables come with gloves, a cleaning brush, a storage bag, and glasses.
- Extra-large and easy to connect wires
- Has a thick inner core for stale current flow
- LED lights to show if the connection is right or not
- PVC coated clamps for safe use
- These cables are the most expensive
8 Emgo 84-96306 06’ Cycle Jumper Cable
These cables are not made for cars but rather, they are more suited for motorcycles, snowmobiles, mountain bikes, etc. The users that need to jump-start only bikes, these smaller, lighter, and easier-to-carry cables are the better option. They are, however, not safe to use with large equipment. Only 12 volts batteries are safe to use with these Emgo jumper cables. They are 10-gauge and six-feet long. The cables also have insulation and color-coding for safe use.
- Light and easy to carry cables for motorcycles
- Color-coded clamps for safe use
- Well-insulated cables for durability
- It is only six feet long
9 Toulpuer Battery Jumper Booster TP009-1
Toulpuer jumper cables restart a dead or weak vehicle battery. This makes for a great tool in emergencies. The booster cable connects with an external battery from another vehicle. This gives voltage to the dead battery. Most vehicles use a 12 or 24-volts battery, and this cable is safe to use with that.
This cable is 16 feet long and has six-gauge thickness. The cable is not the longest but long enough to access the other vehicle easily.
These jumper cables are portable and come with a hard storage box. It is easy to carry around because the box protects the cables from any damage. The portability of the cables makes them a must-have tool in case your vehicle runs out of battery in the middle of the road.
The highest quality materials make this heavy-duty booster cable with alligator clamps. There are four tight-grip clamps for each end. Two of them are red, and two of them are black. The clamps have a strong spring and a handle with a good grip.
The red and black colors are for safety. Therefore, you can easily connect the right color to the right terminals of the battery. This protects the wires from accidentally crossing.
You can use this with many different vehicles. Its thickness and current rating make it suitable for motorcycles, cars, trucks, vans, and SUVs. The package has easy-to-follow written instructions for how to safely use the cables.
- Has a PVC insulation and good flexibility
- Gives a stable and strong current supply
- The clamps have a protective cover
- The cables are not the thickest
10 Nilight 2 Pcs 30A Alligator Clips Booster Jumper Cable
Nilight alligator clips and jumper cables are designed to power 12 volt and 24-volt batteries of appliances and vehicles. The alligator clamps can be attached directly to the battery. Color coding makes the cables safe for use. The red is for positive, and the black is for negative.
High-quality and robust copper makes the clamps. Copper also gives it good conductivity and makes it charge batteries faster. The material and construction of the clamps are highly durable because of their thickness.
The terminals that connect to the battery have a tin coating. This gives it stability, wear resistance, and corrosion resistance. Tin also protects the copper from oxidation and improves its conductivity. Except for large cars, this cable works with many vehicles. They are easy to store in your car, truck, and transport.
To ensure a long lifespan, Nilight products are passed through various testing stages to make sure they deliver over 50,000 hours working when used normally. So if you follow the instructions and don’t connect to batteries that are too large, they will last long.
- Has an external fuse protector in case of short-circuiting
- The clamps have 100% copper jaws for good conductivity
- It has a heavy PVC coating for safe use
- It is resistant to corrosion and rust
- This cable is not for big cars
Best Jumper Cables Buying Guide
When attaching an external electric source to the car, you need to be sure that the current will not over-surge and cause any damage. Therefore, you should check the safety, durability, and how much current the cable can handle before connecting it to your car.
For instance, these are a few of the things you should keep in mind.
Length is an important factor when it comes to jumper cables. A long cable means attaching the two vehicles with the cable will be simple. You don’t have to move the car to make sure the clamps reach the battery.
Cables that are 25-feet long connect vehicles front to front, front to back, and side to side. Other common sizes are 20, 16, 8, etc. But jump-starting bikes only require small cables.
A gauge is a device that measures the dimensions of an object. A gauge is also a verb. When it comes to wires, gauge measurement is used to determine their thickness. The lower the gauge measurement, the thicker the wire.
Zero is the thickest measurement. It gives the most stable and highest current. It also has the most variety when it comes to the vehicles it can jumpstart. Generally, eight gauge measurement is enough for most vehicles, but lower values offer faster charging if that is what you want.
Any conductive material requires insulation for safety and ease of use. Therefore, mostly PVC or polyvinyl chloride, which is inherently rigid and flexible, is used for insulation. This material makes the cables flexible and tangle-free. It also protects the cables from extreme weather and makes them functional in any condition.
Insulation is necessary for the safety of the user as well. Accidentally touching bare wires is a safety hazard. This is why the clamps also require insulation.
The clamps are what connect to the terminals of the battery directly. They should be highly conducive to ensure the battery charges fast. The clamps should also not be loose; instead, they should have a tight grip to maintain the flow of current. For a tight grip, the clamps need to have a tight spring and jagged jaws.
The construction of the clamps is done using pure copper. Copper improves the conductivity of the clamps. For this reason, they should be covered with insulation to handle them safely.
In conclusion, jumper cables can be a lifesaver for your car’s battery as well as for yourself if you find your vehicle out of power in the middle of the road. But different things factor into the strength and usability of these cables.
These things include length, amperes, gauge, and material used for the wire and insulation. Keeping all these things in perspective, the best product from the list is the 25 feet and 800 amp Energizer Jumper Cable. It offers long length for ease of use and high amperes for use on large vehicles, such as trucks, SUVs, and large cars.