Home » Best Sway Bar Bushings In 2021 – Top 5 Rated Reviews & Buying Guide

When you buy through links on our site, we may earn an affiliate commission at no cost to you.

Best Sway Bar Bushings In 2021 – Top 5 Rated Reviews & Buying Guide

Your vehicle features a stabilizer bar that is designed to absorb any bumps on the road and also reduce the overall noise when you are driving. These bars have rubber bushings and their purpose is to prevent your car from rolling over when you are turning or cornering.

Over time, these bushings tend to wear out and handling and steering become difficult. But there are so many different kinds of bushings available on the market, choosing the best sway bar bushings seems like an irksome task.

Hence, we have developed this guide to present you with the best sway bar bushings on the market along with some other advice. So keep reading and find out what you need to know about these simple yet crucial products in your vehicle.

Best Sway Bar Bushings In 2021 – Top 5 Rated Reviews & Buying Guide

Best Sway Bar Bushings Comparison Table

5.25-inch x 3.31-inch x 2.75-inch
4.8 oz
5 out of 5 stars (5 / 5)
5.25-inch x 3.31-inch x 2.75-inch
6.4 oz
4.5 out of 5 stars (4.5 / 5)
4.00-inch x 4.45-inch x 3.00-inch
8.8 oz
4.5 out of 5 stars (4.5 / 5)
6.18-inch x 4.57-inch x 2.48-inch
6.3 oz
4.7 out of 5 stars (4.7 / 5)
2.00-inch x 3.50-inch x 3.50-inch
10.9 oz
4.7 out of 5 stars (4.7 / 5)

Top 5 Best Sway Bar Bushings In 2021 Reviews

1 Moog K7352 Sway Bar Bushings

The Moog K7352 bushings kit features an innovative split design and construction. With such a design you can easily install these bushings in your vehicle. And soon after the installation, you will notice the noise on the front has significantly dampened.

But that’s not all…!

Not only will be the noise gone but these bushings will restore the handling and steering of your vehicle as if it was new. Moog has engineered these bushings to ensure dependability, resilience, and long life. Moog has also made sure it incorporates battle-tested engineering and design features into them. And to make the inner sleeve safe from any corrosion, Moog has coated it with phosphate.

The manufacturer has made sure it uses only high-quality materials in the construction of these bushings.

They will fit in quite conveniently, but you will notice they are some-what tough to snap on the bar. This is a sign of quality materials that Moog is well-known for. There is no hassle in the overall installation process and you can do it yourself.

However, there is a catch…!

If you think you can’t do it, you can always take your vehicle to your local workshop and get the job done. As soon as these bushings will go in, you will notice a lot less noise and the vehicle is holding up pretty well when you are cornering.

Moog K7352 Sway Bar Bushings
Our rating:5 out of 5 stars (5 / 5)


  • Split design and convenient installation.
  • Replacing the bushings will immediately dampen the noise on the front end of your vehicle.
  • Your vehicle’s handling and steering will be immediately restored.
  • These bushings are designed to provide you with a long-lasting service.
  • These bushings are made with the help of the latest industry engineering and design features.
  • Phosphate coated inner surface to prevent any corrosions or damage.


  • These bushings are pretty tough to clamp on the bar.

2 Moog K8655 Sway Bar Bushings

The K8655 comes with a split design and ensures easier installation on most Ford trucks from 1978 to 1995.

These bushings, just like the previous ones, will immediately reduce the front end noise on your vehicle when you corner it. Your vehicle will immediately start performing like a new one as if you have just bought your car. Moog has used quality materials in the construction of these bushings. So they can continue to perform inside your vehicle.

These bushings enhance the overall performance of your vehicle’s chassis by reducing vibrations and noise in the front section of your car.

And there’s more…!

The price of these bushings is budget-friendly so you can easily upgrade your vehicle without spending a lot. The bushings only need a couple of bolts to hold them in place on the sway bar. And there is nothing else you need to use with it.

But there’s a catch…!

These bushings are well-trusted for their capability and performance in improving your vehicle’s performance. But they don’t guarantee a universal fitment design. Therefore, it’s better for you to properly measure the sway bar’s diameter using a caliper before you purchase these bushings.

These are even better than the OEM bushings of your vehicle to increase its efficiency. Moog has been very successful with this product because the company constantly introduces the various design and engineering enhancements. It is done to increase the overall life of the product and make the installation and replacement process simple and easy.

No wonder, the company has regularly been regarded as the problem-solver of the chassis industry.

Moog K8655 Sway Bar Bushings
Our rating:4.5 out of 5 stars (4.5 / 5)


  • Split design construction for quicker and easier installation.
  • Replacing them will immediately get rid of any noise in the front section of your vehicle.
  • You will restore your vehicle’s ability of handling and steering just as if it was new.
  • The inner sleeves have a phosphate coating to prevent corrosion and rusting.


  • Universal fitting is not guaranteed.

3 Prothane 4-1138 Front Sway Bushings

Want to go for high-end bushings for your vehicle, consider buying Prothane Red. They are red and precisely engineered for a perfect fit. Prothane has used high-quality polyurethane compounds in the construction of these bushings. And as soon as you install them, your vehicle will become stable and nose free especially during those turns. Even on bumpy surfaces, you will experience a very smooth cornering.

But there’s more…!

Prothane has used modern-day technology in the construction of the bushings. Therefore, they are pretty simple to install and your ride will be smoother and safer. And to add to that, when you install these bushings you are making your vehicle safe especially during any energy cornering or turning.

However, you still might consider your buying decision when it comes to these bushings. This is because these bushings are pretty expensive that might put you off. Additionally, these bushings only come in red color and if you’re a fan of black or blue, you might end up walking away from them.

But needless to say, installing these is pretty simple and you don’t have to go through a lot to get them on your sway bar. You don’t even have to bolt the installation either to keep it in place.

These bushings come with precise fabrication and for that, they offer a perfect fit. It can hold on to the super grease to make sure you don’t have to deal with any noise again. Prothane has used premium quality polyurethane to ensure the bushings provide you with the necessary rigidity.

Prothane 4-1138 Front Sway Bushings
Our rating:4.5 out of 5 stars (4.5 / 5)


  • Precise construction for accurate fitting.
  • Premium quality components and materials are used in the engineering process
  • These bushings provide the necessary rigidity.
  • Very easy to install and hold their place pretty well.


  • Only available in red color which might not be the color of your choice.

4 Turtle Den Ford F53 A-Class Sway Bushings

These sway bar bushings are suitable for Ford F53 Class A motorhome vehicles, these will fit any of the models from 1999 to 2011. These bushings come with a decent price tag and you won’t have to empty your pockets to get them in your vehicle.

These are either available in blue or black color, so if you don’t like red in your bushings then here’s good news for you.

Here’s how you can use this…!

The bushings are very easy to install and they come with a lifetime warranty. These are best suited for chassis that features a 6.8L V10 engine. There are a couple of bushings that will be included in your purchase. They are pre-split so you can conveniently install them on your vehicle’s sway bar.

Ideally suitable for a 36mm sway bar these bushings are made of high-quality materials.

But there’s a catch…!

They don’t come with the black bracket and you will have to purchase that separately. If you already have the bracket, you don’t need to do any further buying. Just get the bushings on your sway bar and you’re good to go.h

Turtle Den has used hard rubber for the construction of these bushings and is designed to hold up pretty well over time. Made with the latest technology and modern engineering design these bushings will stay on and you won’t have to make any adjustments later on.

To avoid any inconveniences, you should take a caliper and measure the diameter of your vehicle’s sway bar if the dimensions are right.

Turtle Den Ford F53 A-Class Sway Bushings
Our rating:4.7 out of 5 stars (4.7 / 5)


  • Quality bushings made of hard rubber.
  • Engineered with the latest technology in the field for the best performance.
  • These rear sway bar bushings are suitable for 1999 to 2011 models.
  • They are extremely easy to install.
  • Available in blue or black colors.


  • You will have to purchase the brackets separately.

5 Dorman 928-314 Sway Bushings

Want to buy the complete set in a single purchase to avoid inconvenience? Consider buying the Dorman bushings kit. This kit includes the bracket along with the bushings, bolts, and nuts. The kit contains everything necessary for the installation purpose.

As soon as you get these bushings installed on your sway bar your vehicle’s suspension will become responsive and work as it should. It is a mandatory replacement to ensure road safety and you will dampen the noise as well.

It is recommended that you directly replace the bushings for a proper fit and don’t install these bushings on the older ones or they won’t fit.

And that’s not all…!

These bushings have gone through some rigorous quality testing procedures to ensure conformance and reliability according to the industry standards. They come in black color but if you need to paint them, you can do that too because they are paint-ready.

These bushings come with a bolt design and you will need these bolts to fit the bushings on your sway bar. There is no technicality involved in the entire installation procedure. However, we do recommend you measure the diameter of your sway bar first and place the order later. It will allow you to save yourself from any inconvenience.

These bushings are made of polyurethane compound and it has some rubber in it as well. Therefore, this material is very stiff and last for a long time to come. It means your vehicle will continue to corner and steer with ease. These bushings are suitable to use in any model from 1990 to 2005 and you don’t need any special tools either.

Dorman 928-314 Sway Bushings
Our rating:4.2 out of 5 stars (4.2 / 5)


  • Made of rubber and polyurethane compounds.
  • Comes with an entire installation kit.
  • The replacement will immediately restore the suspension in its normal function.
  • The direct replacement is mandatory for an accurate fit.
  • Rigorous quality testing to ensure durable performance.
  • Ready for a paint job.


  • Slightly expensive.
  • Only suitable for 1990 to 2005 models

Best Sway Bar Bushings Buying Guide

When buying, the best sway bar bushings your need to keep some important features in mind before you finalize your purchase decision.

  • Size

The size of your sway bar is the most important factor because you don’t want to use an ill-fitting bushing on your sway bar. There is no point in replacing the old ones. Make sure you measure the diameter of the sway bar using a caliper and then choose a pair of bushings based on these measurements.

sway bar bushings

  • Materials and construction

There are different types of materials used in the construction of these bushings. You might go for the metal ones because they are the stiffest of them all but they are suitable for heavier vehicles. Rubber is another option but they can stretch under extreme pressure. Therefore, go for polyurethane because these bushings are stiff and they can take a toll pretty well.

  • Easy installation

You have to make sure the bushings that you are looking for, come with an easy installation process and a guide as well.  In most cases, you’ll tell your mechanic to do the jobs but till then you need to make sure the installation is easy.

  • Durability

Durability is critical because you are putting money into buying the bushings and getting them installed. They must last some years at least. You can consider coating materials or warranty to ensure the overall durability of the bushings that you are considering.

  • Maintenance

You need to keep in mind that maintenance-free doesn’t mean reduced nose or durability. But you must know how to properly maintain your bushings. You need to make sure you don’t go for the bushings that need constant greasing.

Benefits of Sway Bar Bushings

There are some benefits of installing the best sway bar bushings which are as follows:

  • Dampened noise

One of the most significant benefits is it will immediately reduce the noise that comes out of the front or rear end. Those rattling and clunking noises can be very discomforting while driving. These noises result from the worn-out bushings.

Consider it a warning and immediately look to replace your bushings to ensure your vehicle remains safe while steering or cornering.

best sway bar bushing

  • Reduced vibrations

These bushings on your vehicle’s sway bar and its end link are also called anti-vibration mounting. They have a significant role to play in reducing these vibrations, especially during those bumpy rides. When you have these bushings in pale your ride will be softer and less bumpy.

Just make sure you install these bushings properly to reduce harshness, noise, and vibration in your drive.

  • Superior handling

With your old, worn-out bushings you have to deal with slow handling over sharp turns. This is the time when you need to change your bushings. With new bushings, your vehicle will corner very well while maintaining comfort and safety.

  • Improve road safety

Having your new bushings in place, your vehicle can conveniently go over sharp turns and cornering will improve significantly. With worn-out bushings, there is a significant chance your car will roll over if you are going at high speeds and start making sharp turns. Therefore, the new bushings make sure your car maintains its stable position and there are fewer chances of your vehicle rolling over.

Types of Sway Bar Bushings

There are four different types of sway bar bushings and they all serve different purposes. Let’s have a brief look at each one of them.

  • Metal bushings

These bushings are made of steel or iron and you will find them in old vehicles as well as heavy trucks. These bushings are preferable in heavy equipment because they are stiff and can easily handle abuse and stretching. But they wear out pretty fast too and you will have to lube them frequently.

  • Rubber bushings

These are the most frequently used bushings you find in modern cars. Rubber is a top choice because it can handle the heat, frictions, and cold. Additionally, these bushings don’t need any maintenance and are cheap too. You also don’t need to lubricate them. But if the rubber is put through a lot of pressure it tends to stretch and results in suspension misalignment.

  • Polyurethane bushings

As rubber can stretch and flex, therefore, handling can become a serious issue. Therefore, manufacturers went for a stiffer material than rubber and that is polyurethane. It is as rigid as metal bushings but they don’t wear out that quickly however, they tend to warp just like rubber. These bushings are expensive as compared to metal and rubber bushings.

  • Greasable bushings

These bushings are either greasable or non-greasable. Greasable variants have channels in them and allow the lube to trave; throughout the bushings and reduce noise and friction. Non-greasable variants are cheaper and maintenance-free. But they don’t last very long or provide you with a silent ride.

Top Brands

Here are the top brands you need to consider if you are looking for the best sway bar bushings.

  • Moog

Moog was formed back in 1919 and it is an international American company. In the year 2001, the company extended its business to Europe. And from there, it turned into a global brand that produced quality suspensions and steering kits along with chassis parts.

Moog takes quality very seriously and you can trust the brand with its products for their safety and comfort.  Hence, the company backs all its products with a 3-year warranty.

  • Prothane

Prothane is another international company with its headquarters in Ontario, California. A company named Dee Engineering was working since the 1970s and it primarily dealt with automotive parts. In 1991 they launched Prothane and during that time it only had around 100 products.

Now there are over 5000 of these products and the company has made an international name as well. Prothane manufactures suspension kits as well as rear sway bar mounts.

  • Dorman

Dorman is another company that has been around since 1918. It is one of the leading automotive parts manufacturers and has its headquarters in Colmar, Pennsylvania. The company has been dealing in aftermarket parts and it still is the primary business of the company.

With their parts, the company provides the freedom to vehicle owners and installers to easily fix their cars with increased reliability and convenience.

Sway Bar Bushings Pricing

There are three different price categories for these bushings.

  • Less than $20

This price range contains all maintenance-free bushings and pretty easy to install as well. Most of them will be made of thermoplastic or rubber. They are efficient but they might not withstand extreme pressure.

  • $20 to $50

You will find polyurethane bushings in this category and they have quality construction. They can withstand high stress and heat. They might come with brackets for installation or may also hold lube or grease to reduce noise and frictions.

  • More than $50

In this category, you will find bushings made of specially developed polyurethane compounds. They can resist heat pretty well and they can handle noise too. They are extremely effective in improving your vehicle’s cornering and handling. And can take abuse pretty well too.


The best sway bar bushings are the Moog K7352 Sway Bar Bushings. These are very easy to install and require bolt installation. These bushings are made of rubber and can withstand extreme heat and cold. These bushings have all the features you need in the best products. The only issue with that is they don’t guarantee universal fitment.

Sway bar bushings are great because they keep your ride comfortable and bump-free. They also reduce any noise and keep your vehicle in control while it is steering or cornering. There are other products that you can try as well. Just make sure they are made of high-quality materials and don’t need much maintenance.

Leave a Comment