Home » Top 10 Best vertical pressure washer pump Reviews

When you buy through links on our site, we may earn an affiliate commission at no cost to you.

Top 10 Best vertical pressure washer pump Reviews

Top 10 Rated vertical pressure washer pump in 2022 Comparison Table

SaleBestseller No. 1
Little Giant VCMA-20ULST 115 Volt, 80 GPH, 1/30 HP Automatic Condensate Removal Pump with Safety Switch and Tubing, White/Black, 554435
  • AUTOMATIC CONDENSATE PUMP: features a vertical-type switch to reduce footprint and is designed to automatically remove condensate produced by boilers, furnaces, air conditioners and de-humidifiers
  • HIGH PERFORMANCE MOTOR: 1/30 HP, 1.5 Amps, 93 Watts, 115 Volts, 60 Hz, thermally protected, fan-cooled motor; CSA listed in the USA and Canada
  • BUILT TO LAST:  stainless steel motor shaft, thermal overload protected motor; CSA certified to US and Canadian standards
  • INCLUDES SAFETY SWITCH and 20-FT VINYL TUBING: safety switch can be connected to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow
  • SPECIFICATIONS: 3/8-inch OD barbed discharge, 80 GPH at 1-foot head, 20 foot shut-off, up to 8.7 PSI, 3 inlet drain holes, 6-foot cord; maximum water temperature: 140 F, equipped with safety switch, 20-ft. tubing included
Bestseller No. 2
Water Diaphragm Self Priming Pump 3.0 Gallons/min (11.3 Lpm) 45 PSI New Rv / Marine 12 Volt Dc / 12 V Demand Fresh
  • (1)Diaphragm Pump,(1) set of instructions,(2) 1/2" barbed hose adaptors,(1) 50 mesh inlet strainer
  • 3.0 Gallons Per Minute capacity flow, and 45 PSI pressure setting
  • Self priming, smooth, silent operation and can run dry without damage
  • Voltage: 12 VDC Dimensions: 7.84" X 5.00" X 4.62" Amps: 3.0 (6.0 Max. Amps)
  • 4-Year Warranty
Bestseller No. 3
SEAFLO 33-Series Industrial Water Pressure Pump w/ Power Plug for Wall Outlet - 115VAC, 3.3 GPM, 45 PSI
  • UL 778 & CSA 22.2 Certified
  • Self-Priming up to 6 vertical feet
  • 3.3 GPM Flow Capacity, 115V AC Current Draw .75 amps (1.2 Max Amps)
  • Built-in Adjustable Pressure Switch that turns on/off at 45 PSI
  • Plugs into standard wall outlet with pre-installed power plug
Bestseller No. 4
Superior Pump 91014 1/4 HP High Flow Thermoplastic Utility Pump, Black
  • 1/4 HP high-flow utility pump moves up to 2220 gallons per hour; pumps water up to 25-vertical feet
  • 1-inch NPT discharge; includes 3/4-inch garden hose adapter
  • Tough thermoplastic construction; Oil-free motor design; Convenient carrying handle; 8-foot power cord; CSA listed; Simple operation, plug pump in to turn on, unplug to turn off
  • Multi-purpose pump is ideal for water removal from basements, crawl spaces, window wells, tubs, buckets, stock tanks, water-filled boats, standing water, flat roofs and general water transfer; Environmentally friendly oil free motor design
  • Superior Pumps are Built to Last, engineered with quality components and are 100% factory tested
Bestseller No. 5
YAMATIC 7/8" Shaft Vertical Pressure Washer Pump 3000 PSI @ 2.5 GPM OEM & Replacement Pump for Power Washer Compatible with 308653045, 308653093, 308653052, 308653078, GCV190 Rear Inlet/Outlet
  • 💦【Reborn Your Power Washer】YAMATIC Vertical Pressure Washer Pump 7/8" Shaft MAX 3000 PSI / 2.5 GPM / @3400 RPM, Save money by replacing your pump instead of buying a new pressure washer. Top performance at 2800-3000 PSI and replacement for most Rear Outlet 180-196cc at 6.5-7hp engine RYOBI, Honda, Briggs and Stratton, Subaru, PowerStroke, Craftsman, Simpson, Homelite and Many other brand.
  • 💦【Extended Durability】 High-performance double seal system prevents leakage, upgraded technical surfacing piston and bearing, get 120 hrs running time, longer than OEM power washer pump. And the thermal relief valve (TRV) protects the pump from overheating while in bypass mode.
  • 💦【Maintenance-Free】This pump features a maintenance-free crankcase so you never have to change the gasoline. This easy-to-install kit is great for power washers that can support 3000 PSI at 2.5 GPM to wash walls, fences, sidewalks, vehicles, and more. ⚠ This pump also fit for the front inlet/outlet engine, but you need to rotate the pump 180 degree and drill holes in the frame to install the pump. If this is difficult for you, please choose a front inlet/outlet pump directly.
  • 💦【Easy Start】 Built in for simple & quick cold starts to make the startup a breeze, no need to release pressure before starting engine. Each kit includes a siphon tube with filter, mounting bolts, shaft key, and instruction booklet to get your machine back in action as quickly as possible, Set up in 5-10 minutes!
  • 💦【COMPATIBILITY 】Replacement for►Homelite: 308653052, 308653006, 308653093, 308653078, 308653008, 308653036, 308653035, 308653026, 308653058. ►Ryobi: RY802900, RY802800, RY802723, RY8C2700, RY802700A. ►PowerStroke: PS80946, PS80931. ►Husky: HU80709, HU80911, HU80709A, HU80911A. ►Craftsman: 580.752960, 580.752052, 580.752191, 580.752880. ►Briggs & Stratton: 311553gs, 020441-0, 020442-0. ►Simpson: ms60773, msv3024.
SaleBestseller No. 6
YAMATIC 3/4" Shaft Horizontal Pressure Washer Pump - 3000 PSI @ 2.5 GPM - Original Engineering OEM Pump for Most Brand gas engine power washer
  • PERFORMANCE and DURABILITY upgrade - Industry engineering process designed for residential powerful pressure washer cleaning job, longest real 120 hours endurance test than similar residential pump. Improved 3000 PSI X 2.5 GPM performance make your cleaning job more powerful for multiple work, like house, fences, sidewalks, vehicles, pool etc.
  • OEM EXTENDED TECHNOLOGY - Based on voice of our millions customers and our original equipment manufacture technology, we process this top level pump that impossible be outdone by so-called Replacemnet Pump. Made in USA key parts and our OEM background is much higher technology, of couse more safe and more durable than similar replacement pump.
  • FIT for WHO - USA Standard Mounting design, this pump could fit most brand gas power washers come with the small gas engine from 180 to 225 cc (Equival 6.0 to 8 hp engine). Please Note only fit a 3/4" Shaft Horizontal pressure washer pump.
  • EASY START EASY JOB - Pre-filled gasoline for lifetime and no need to change oil. Easy set up as video show. Also Easy-Start structure with light recoil start. Make power washer more powerful and more easy. Recommend to drain out water inside pump and use Briggs Stratton and SIMPSON pump guard before long time storage.
  • COMPATIBALE-Replacement for ►HONDA GC190, GC135, GX140,GX160 (GC160 with 3/4" keyway shaft). ►Homelite 308418007, 309515003, 308418004, 308653078, 308653057, UT80522B, UT80953B, UT80522A, UT80953A. ►Karcher: G3050OH, K2400HH, G2400HH. ►POWERSTROKE PS80522, PS80903B ►GENERAC 308418007, 580.762011, 01675. ►Troy-Bilt: 020241, 020241-1, 20242. ►SIMPSON: MS60753, MS60788, MS60850, MS60799,MS61043. Please feel free to contact us for any technical and afterserivce requirement.
Bestseller No. 7
OEM Technologies 90029 Replacement Pressure Washer Pump Kit, 3400 PSI, 2.5 GPM, 3/4" Shaft, Includes Hardware and Siphon Tube, for Residential and Industrial Gas Powered Machines
  • Extend the life of your pressure washer: Save money by replacing your pump instead of buying a whole new power washer. This easy-to-install kit is great for power washers that can support 3400 PSI at 2.5 GPM to wash walls, fences, sidewalks, vehicles, and more
  • Easy Installation: This replacement pump features a garden hose inlet and threaded M22 connection high pressure hose outlet. The SAE standard bolt pattern that fits most* gas-powered pressure washers. Each kit includes a siphon tube with filter, mounting bolts, shaft key, and instruction booklet to get your machine back in action as quickly as possible. (*Check your pressure washer's inlet and outlet orientation to ensure compatibility)
  • Skip the Oil Change: This pump features a maintenance-free crankcase so you never have to change the oil. It is manufactured from fully anodized die-cast aluminum for protection against corrosion
  • Extended durability: A Thermal Relief Valve (TRV) protects the pump from overheating while in bypass mode. The TRV releases small amounts of hot water and intakes cooler water to prevent overheating and extend the life of the pump
  • Get the right pump for your machine: this pump is designed for gas-powered pressure washers with horizontal engines. Its SAE bolt pattern, hardware, and standard connections make it a great fit for many brands and models of power washers
Bestseller No. 8
SHURflo Industrial Pump - 198 GPH, 115 Volt, 1/2in, Model# 2088-594-154
  • self-priming up to 9 vertical lift feet
  • used in delivery and transfer of liquid applications up to 3 GPM (11.4LPM)
  • 1/2" MPT, 115VAC 60Hz, non-corded 3 wires, built-in check valve prevents back flow of fluid
  • built-in pressure switch, turn on/off at 45psi, adjustable pressure setting
  • Santoprene valves and diaphragm
Bestseller No. 9
OEM Technologies 90028 Horizontal Axial Cam Replacement Pressure Washer Pump Kit, 3300 PSI, 2.4 GPM, 3/4" Shaft, Includes Hardware and Siphon Tube, for Residential and Industrial Gas Powered Machines, Silver
  • Extend the life of your pressure washer: Save money by replacing your pump instead of buying a whole new power washer. This easy-to-install kit is great for power washers that can support 3300 PSI at 2.4 GPM to wash walls, fences, sidewalks, vehicles, and more
  • Easy Installation: This replacement pump features a garden hose inlet and threaded M22 connection high pressure hose outlet. The SAE standard bolt pattern that fits most* gas-powered pressure washers. Each kit includes a siphon tube with filter, mounting bolts, shaft key, and instruction booklet to get your machine back in action as quickly as possible. (*Check your pressure washer's inlet and outlet orientation to ensure compatibility)
  • Skip the Oil Change: This pump features a maintenance-free crankcase so you never have to change the oil. It is manufactured from fully anodized die-cast aluminum for protection against corrosion
  • Extended durability: A Thermal Relief Valve (TRV) protects the pump from overheating while in bypass mode. The TRV releases small amounts of hot water and intakes cooler water to prevent overheating and extend the life of the pump
  • Get the right pump for your machine: this pump is designed for gas-powered pressure washers with horizontal engines. Its SAE bolt pattern, hardware, and standard connections make it a great fit for many brands and models of power washers
Bestseller No. 10
Green Expert 1/3HP Sump Pump Submersible with Unique Flow Sensor Switch Last-inch Water Clean Draining Design for Completely Water Removal from Flooded Basement Laundry Pools Hot Tub Spa 203629
  • 【Split Capacitor Motor with Efficiency】Oil-free PSC motor with thermal overload protection produces 1/3hp output power for higher performance and increased reliability. Pump moves up to 2000 gallons water per hour at zero feet, 22.5 gallons per minute at 10 ft of discharge lift.
  • 【Last-inch Drain Pump】Unique water sensor switch with non-return valve drains water to the lowest suction level of 1/25inch without back flow. It would stop automatically after running 15sec when there's no water covering on the sensor to remove more remaining wate on flat floor. Designed for completely draining clean or slightly dirty water from flooded house, basement, sumps, window wells, water tanks, pools, cisterns, hot tub spas, and flooding in low lying areas.
  • 【2 In 1! Automatic&Manual Operation】This utility sump pump can work manually or automactially according to actual needs. With easy insert-in design, you can freely switch the pump to work as manual or automatic.
  • 【Lightweight, Convenient to Use&Carry】☘ Item weight: 8.8lb. The 25 feet long grounded waterproof cord with portable handle allows convenient installation from farther position, no more trouble for dealing with extension cords!
  • 【Safety Guarantee and Customer First】Follows UL 778 standard for safety and 100% manufacturer tested. For any question, please don't hesitate to write to us through our storefront and click "ask a question", or support email to us, we will respond within 24 hours.
Are you looking for top 10 great vertical pressure washer pump on the market in 2022? Our team had scanned more than 14,621 customer satisfaction about top 10 best vertical pressure washer pump in 2022, we have come up with the top 10 rated products you may be interested in. We have ranked the best brands from Artificial Intelligent and Big Data, as you see below:

Our Best Choice: SurmountWay 3200 PSI Pressure Washer Pump Vertical 7/8″ Shaft (Vertical)


Our rating:4.6 out of 5 stars (4.6 / 5)





[ad_1]

Product Description

11

Pressure water pumps are the most important part of a pressure washer. They power through to deliver water at high speeds.

SurmountWay provides an efficient Horizontal Axial Pressure Washer Pump Kit, minimizes engine load while delivering top performance.

Nothing is worse than having to return a product, trust us…we get it. Let’s work together to avoid this!

11

11

Pump Specifications:

Pump Type: Axial Cam

Head Material:Aluminum

Max Pressure:3200psi

Rated Flow:9L/Min(2.4GPM)

Engine HP Choice: 6.5 HP

Max. Water Supply Temperature: 104°F

Direct drive Horizontal Axial power washer Pump designed to fit most brands & models up to 3200 PSI.

7/8″ shaft & SAE gas engine flange produces up to 2.4GPM, suitable for homeowner units.

Engines Brand: Fits Honda(only 7/8″ shaft), Generac, Briggs & Stratton, Craftsman, Karcher, Blackmax, Ryobi, Troy Bilt, Craftsman, Simpson, Powerstroke.

11

11

11

11

11

Choose the Right Replacement Pump

This pump is Exclusively for Vertical engines with a 7/8″shaft(Does Not Fit engine with 3/4″ shaft )

Mount the New Pressure Washer Pump

Install the shaft key into the keyway and push the pump completely onto the engine.

Then Install all four bolts and tighten evenly.

Powerful Performance

The powerful pressure washer pump generates impressive 3200 PSI with a 2.4 GPM flow rate for tackling tough dirt and debris, can get the job done quickly!

Fits 7/8″ Shaft Vertical Crank Engines ,choice for replacement pumps.
Easy Start System: Built in for simple & quick cold starts to make the startup a breeze, no need to release pressure before starting engine.
Fits many models Engines for Blackmax, , for Karcher Pressure Washer. easy connection to most 7/8” diameter shaft vertical gas engines.
Our washer pump is comprised of quality aluminum that mitigates risk of long-term wear and tear. And it’s not just the pump itself, but all components of the pressure washer pump repair kit.
This PUMP replacement pump is rated at 2800 – 3200 PSI and 2.2 – 2.4 GPM which is great for any and all small house cleaning projects. Thermal relief valve opening temperature is 140°F -150°F.

Leave a Comment